Step-by-Step Guide to Installing Art in a Floater Frame with a Spacer

Installing art in a floater frame with or without a spacer not only improves its appearance but also provides additional protection. This guide walks you through the process of installing a floater frame and spacer (if neccessary), ensuring your artwork is securely and aesthetically displayed. From preparing your workspace and selecting the right tools to the final hanging steps, these instructions offer a clear and concise method for achieving a professional look. Whether you're using direct screw attachment or offset clips, following these steps will help you showcase your artwork beautifully.Preparing Your Workspace

1. Find a Space: Lay out your artwork, floater frame, spacer (if neccessary), supplies, and tools on a clean, flat surface. Please note: due to varying sizes, the screws to attach the spacer and/or screws to attach the frame to the spacer are not provided or sold by Articient.  Articeint only provides these screws when performing an installation option selected during the ordering process.  

Install the Spacer

2. Select Screws: Measure the depth of your canvas and spacer. Choose screws that secure the spacer to the stretchers without puncturing the face of the artwork.
3. Position Spacer: Center the spacer on the back of the artwork with the countersunk holes facing up.
   
   
4. Attach Spacer: Insert screws into the spacer's holes and tighten them securely.
   

Installing Artwork in Floater Frame

Option 1: Direct Screw Attachment (most popular)

1. Prepare Frame: Drill pilot holes about ¼" from the inside edge of the frame.
   
2. Center Artwork: Use canvas keys or business cards to ensure the artwork is centered.
   
3. Attach: Insert and tighten screws through the frame into the spacer.
   

Option 2: Offset Clips (use this option if the stretcher and frame are overly narrow)

1. Attach Clips: Screw offset clips to the frame.
   
2. Center Artwork: Use canvas keys or business cards for alignment.
3. Attach: Insert and tighten screws through the frame into the offset clips.

Finishing Touches

1. Hanging: First, attach D-loops and wire to the back of the frame, then hang your artwork.

Additional Tips:

• Double-check Alignment: Before tightening the screws completely, ensure the artwork is perfectly centered and aligned within the frame.
• Protect Your Workspace: Use a soft cloth or mat to protect the frame and artwork from scratches during installation, ensuring careful handeling throughout the process.
• Use Proper Tools: A power drill with the appropriate bit size can make the process faster and easier.
• Check for Stability: Once the artwork is hung, ensure that it is stable and secure on the wall.

For more detailed instructions, visit the Articient guide.